Directory

 

 
 
General InformationPublicationsResearch Projects

  • Edward Demeter and Kristopher R Doll, 2016, "Investigation of Work-piece Distortion during Photo-Polymerization of a PAAW Joint", ASME Journal of Manufacturing Science & Engineering, Vol 138, (11), pp. 20
  • Edward Demeter, Kristopher Doll and Karan Arora, 2016, "Influence of Curing Regimen on the Distortion of a Work-piece held by a Hybrid PAAW Fixture", Proceedings of the SME NAMRC 44, Elsevier, 5
  • Mahesh Mantena, Arnau Pisa Cloquell and Edward Demeter, 2013, "Analysis of a Laser Process for Permanently Degrading a Photo-Activated Adhesive Joint", Journal of Manufacturing Processes, 16, pp. 190-199
  • Edward Demeter, 2012, "PHOTO-ACTIVATED ADHESIVE WORKHOLDING (PAAW) TECHNOLOGY", pp. 104
  • C. C. Baker and Edward Demeter, 2010, "Investigation of a Critical Irradiance Criterion for Minimizing the Cure Time of a PAW Joint", Journal of Adhesion Science and Technology, 24, pp. 1303-1317
  • Edward Demeter and J. S. Kumar, 2010, "Assessment of Photo-activated Adhesive Workholding (PAW) Technology for Holding "Hard-to-Hold" Workpieces for Machining", SME Journal of Manufacturing Systems, 29, (1), pp. 19-28
  • C. C. Baker and Edward Demeter, 2008, "Characterization of the Optical Transmission Losses of a Photo-Curable Adhesive During the Photo-Polymerization of a LAAG Joint", Journal of Adhesion Science and Technology, 22, pp. 1105-1121
  • Edward Demeter, 2004, "Characterization of the Quasi-Static Deformation Behavior of LAAG Joints Adhering Machined Steel Surfaces", ASME Journal of Manufacturing Science and Engineering
  • Edward Demeter, 2004, "Activated Adhesive Gripper (LAAG) Technology and Process", SME Journal of Manufacturing Processes, 6, (2), pp. 201-214
 

About

The Department of Mechanical and Nuclear Engineering at Penn State is one of the nation’s largest and most successful engineering departments. We serve more than 1,000 undergraduate students and more than 330 graduate students

We offer B.S. degrees in mechanical engineering and nuclear engineering as well as resident (M.S., Ph.D.) and online (M.S., M.Eng.) graduate degrees in nuclear engineering and mechanical engineering. MNE's strength is in offering hands-on experience in highly relevant research areas, such as energy, homeland security, biomedical devices, and transportation systems.

Department of Mechanical and Nuclear Engineering

137 Reber Building

The Pennsylvania State University

University Park, PA 16802-4400

Phone: 814-865-2519