Edward De Meter
Professor
Industrial and Manufacturing Engineering
Mechanical and Nuclear Engineering
Office: 217 Leonhard Building
Email: ecd3@psu.edu
Phone: 814-863-7291
Personal or Departmental Website
Mechanical restraint analysis, fixture design and analysis, mechanical assembly system design and analysis.
- Edward Demeter, Kristopher Doll and Karan Arora, 2017, "Influence of Curing Regimen on the Distortion of a Work-piece held by a Hybrid PAAW Fixture", Proceedings of the SME NAMRC 44, Elsevier, 5
- Edward Demeter, Kristopher Doll and Haochen Xie, 2016, "Investigation into the use of Adhesive Fillers and Soft Start Curing to Reduce the Distortion of a Work-piece Supported by PAAW Joints", Proceedings of the SME NAMRC 45, Elsevier, 5
- Edward Demeter and Kristopher R Doll, 2016, "Investigation of Work-piece Distortion during Photo-Polymerization of a PAAW Joint", ASME Journal of Manufacturing Science & Engineering, Vol 138, (11), pp. 20
- Mahesh Mantena, Arnau Pisa Cloquell and Edward Demeter, 2013, "Analysis of a Laser Process for Permanently Degrading a Photo-Activated Adhesive Joint", Journal of Manufacturing Processes, 16, pp. 190-199
- Edward Demeter, 2012, "PHOTO-ACTIVATED ADHESIVE WORKHOLDING (PAAW) TECHNOLOGY", pp. 104
- C. C. Baker and Edward Demeter, 2010, "Investigation of a Critical Irradiance Criterion for Minimizing the Cure Time of a PAW Joint", Journal of Adhesion Science and Technology, 24, pp. 1303-1317
- Edward Demeter and J. S. Kumar, 2010, "Assessment of Photo-activated Adhesive Workholding (PAW) Technology for Holding "Hard-to-Hold" Workpieces for Machining", SME Journal of Manufacturing Systems, 29, (1), pp. 19-28
- C. C. Baker and Edward Demeter, 2008, "Characterization of the Optical Transmission Losses of a Photo-Curable Adhesive During the Photo-Polymerization of a LAAG Joint", Journal of Adhesion Science and Technology, 22, pp. 1105-1121
- Edward Demeter, 2004, "Characterization of the Quasi-Static Deformation Behavior of LAAG Joints Adhering Machined Steel Surfaces", ASME Journal of Manufacturing Science and Engineering
- Edward Demeter, 2004, "Activated Adhesive Gripper (LAAG) Technology and Process", SME Journal of Manufacturing Processes, 6, (2), pp. 201-214