Directory

 

 
 
General InformationPublications

  • O. Shklyaev, Eric M Mockensturm, M. Cole and V. Crespi, 2014, "Theory of electrocaloric effect in a shape-changing container: Gas in a nanotube", Physical Review Letters, 113, pp. 5
  • O. Shklyaev, Eric M Mockensturm and V. Crespi, 2013, "Theory of carbomorph cycles", Physical Review Letters, 110
  • O. Shklyaev, Eric M Mockensturm and V. Crespi, 2011, "Modeling electrostatically induced collapse transitions in carbon nanotubes", Physical Review Letters, 106, pp. 155501
  • James Bluman, Matthew Rowland and Eric M Mockensturm, 2010, "Closing the homework feedback loop, an alternative approach to homework grading", 2010 IEEE Frontiers in Education Conference (FIE)
  • N. E. Antolino, G. Hayes, R. Kirkpatrick, C. L. Muhlstein, M. I. Frecker, Eric M Mockensturm and J. H. Adair, 2009, "Lost mold rapid infiltration forming of mesoscale ceramics: Part 1, fabrication", Journal of the American Ceramics Society, 92, (1), pp. S63-S69
  • Eric M Mockensturm, 2009, "Lost mold-rapid infiltration forming of mesoscale ceramics: Part 2, geometry and strength improvements", Journal of the American Ceramics Society, 92, (1), pp. S70-S78
  • A. Mahdavi and Eric M Mockensturm, 2007, "On the large elastic deformations of carbon nanocones"
  • C. Nisoli, P. Lammert, Eric M Mockensturm and V. Crespi, 2007, "Carbon nanostructures as an electromechanical bicontinuum", Physical Review Letters, 99, pp. 045501
  • N. Goulborne, M. Frecker and Eric M Mockensturm, 2007, Modeling of dielectric elastomer diaphragms
  • N. Goulborne, Eric M Mockensturm and M. Frecker, 2007, "Electro-elastomers: Large deformation analysis of silicone membranes", International Journal of Solids and Structures, 44, (9), pp. 2609-2626
  • C. Nisoli, P. Lammert, Eric M Mockensturm and V. Crespi, 2007, "The graphenic bicontinuum provides a unified analytical treatment of lattice dynamicsand electro-mechanical coupling in graphene and carbon nanotubes", arXiv: Condensed Matter: Material Science
  • A. Mahdavi, R. Balaji, M. Frecker and Eric M Mockensturm, 2006, "Topology optimization of 2D domains for minimum compliance using parallel processing", Structural and Multidisciplinary Optimization
  • Jie Jang and Eric M Mockensturm, 2006, "A motion amplifier using an axially driven buckling beam: Design and experiments", Nonlinear Dynamics
  • Jie Jiang and Eric M Mockensturm, 2006, "A motion amplifier using an axially driven buckling beam: Modeling and analysis", Nonlinear Dynamics
  • Eric M Mockensturm and N. Goulbourne, 2006, "Dynamic response of dielectric elastomers", International Journal of Non-Linear Mechanics, 41, pp. 388-395
  • E. Yang, M. Frecker and Eric M Mockensturm, 2006, "Finite element and experimental analyses of non-axisymmetric dielectric elastomer actuators"
  • G. Hayes, N. Antolino, M. Frecker, C. Muhlstein, Eric M Mockensturm and J. Adair, 2006, "Processing of sub-500 micron scale ceramic parts for surgical applications", Proceedings Materials Science and Technology Conference
  • N. Antolino, G. Hayes, J. Adair, C. Muhlstein, M. Frecker and Eric M Mockensturm, 2006, "Ceramic nanocolloids for medical applications: Meso-scale surgical instrument fabrication, drug delivery and bio-imaging", Proceedings International Conference on the Characterization and Control of Interfaces
  • J. T. Szefi, Eric M Mockensturm, E. C. Smith, K. W. Wang, P. Rehrig and L. Centolanzq, 2006, "Development of a novel high authority piezoelectric actuator for rotor blades with trailing edge flaps"
  • A. Mahdavi and Eric M Mockensturm, 2006, "A rigorous finite element study on the mechanical properties of single-walled carbon nanotubes"
  • A. Mahdavi and Eric M Mockensturm, 2006, "On the large elastic deformation and stability of carbon nanocones"
  • R. Balaji and Eric M Mockensturm, 2006, "The mechanics of rotating wound rolls", ASME IMECE
  • J. Guo and Eric M Mockensturm, 2005, "Nonlinear vibration of parametrically excited, viscoelastic, axially moving strings", ASME Journal of Applied Mechanics, 72, pp. 374-380
  • Eric M Mockensturm and R. Balaji, 2005, "Piece-wise linear dynamic systems with one-way clutches", ASME Journal of Vibration and Acoustics, 127, pp. 475-482
  • N. Goulborne, Eric M Mockensturm and M. Frecker, 2005, "A nonlinear model for dielectric elastomer membranes", ASME Journal of Applied Mechanics, 72, pp. 899-906
  • R. Balaji and Eric M Mockensturm, 2005, "Dynamic analysis of a front-end accessory drive with a decoupler/isolator", International Journal of Vehicle Design, 39, pp. 208-231
  • N. Goulbourne, M. Frecker and Eric M Mockensturm, 2005, "Quasi-static and dynamic inflation of a dielectric elastomer membrane actuator"
  • Eric M Mockensturm, N. Goulborne and M. Frecker, 2005, "Dynamic actuation of electro-elastic spherical membranes using dielectric elastomers", ASME IMECE
  • Eric M Mockensturm and A. Mahdavi, 2005, "Van der Waals' Elastica", ASME IMECE
  • Eric M Mockensturm and R. Benson, 2004, Mechanics and tribology of flexible media in information processing system, CRC Press
  • G. Lesieutre, J. Loverich, G. Koopmann and Eric M Mockensturm, 2004, "Enhancement of mechanical work output of an active material using a non-linear motion transmission mechanism", Journal of Intelligent Material Systems and Structures, 15, pp. 49-58
  • K. Pope, A. Tews, M. Frecker, Eric M Mockensturm, N. Goulbourne and A. Snyder, 2004, "Dielectric elastomer laminates for active membrane pump applications"
  • E. Yang, M. Frecker and Eric M Mockensturm, 2004, "Mathematical model of a dielectric elastomer annulus actuator undergoing large quasi-static deformation"
  • N. Goulbourne, Eric M Mockensturm and M. Frecker, 2004, "Electro-elastic modeling of a dielectric membrane for a prosthetic blood pump"
  • R. Balaji and Eric M Mockensturm, 2004, "Dynamic analysis of a front-end accessory drive with a decoupler/isolator", 2004 ASME IMECE
  • A. Mahdavi and Eric M Mockensturm, 2004, "Continuum modeling approaches for the deformation of carbon nanostructures", 2004 ASME IMECE
  • Eric M Mockensturm and N. Goulbourne, 2004, "Dynamic response of dielectric elastomers", ASME IMECE 2004
  • J. E. Frank, Eric M Mockensturm, G. H. Koopmann, G. A. Lesieutre, W. Chen and J. Y. Loverich, 2003, "Modeling and design optimization of a bimorph-driven rotary motor", Journal of Intelligent Material Systems and Structures, 14, pp. 217-227
  • J. Jiang and Eric M Mockensturm, 2003, "Nonlinear dynamics of a buckling beam actuator"
  • J. Jiang and Eric M Mockensturm, 2003, "A novel motion amplifier using an axially driven buckling beam", ASME IMECE 2003
  • E. Yang, Eric M Mockensturm and M. Frecker, 2003, "Large electroelastic deformation of a dielectric elastomer annulus", ASME IMECE 2003
  • N. Goulbourne, Eric M Mockensturm and M. Frecker, 2003, "Modeling of a dielectric elastomer diaphragm for a prosthetic blood pump"
  • Eric M Mockensturm, G. Koopmann, J. Frank and G. Lesieutre, 2002, "Design and optimization of a bimorph actuator drive with a one-way clutch"
  • J. Loverich, Eric M Mockensturm, G. Koopmann and G. Lesieutre, 2002, "A new mechanically ratcheting piezoelectric motor for high power applications"
  • N. Goulborne, Eric M Mockensturm, M. Frecker and A. Snyder, 2002, "Modeling of a dielectric elastomer diaphragm for a prosthetic blood pump"
  • Eric M Mockensturm and J. Jiang, 2002, "Active structures using buckling beam actuators"
  • J. Woods-Vedeler, R. Pappa, T. Jones, R. Spellman, W. Scott and Eric M Mockensturm, 2002, "Concept definition study for in-space structural characterization of a lightweight solar array"
  • G. Lesieutre, J. Loverich, G. Koopmann and Eric M Mockensturm, 2002, "Enhancing the mechanical work output of a piezo-stack by using a non-linear motion transmission mechanism"
  • Eric M Mockensturm, R. Pappa, J. Woods-Vedeler and M. O'Neill, 2002, "Static and dynamic analysis of stretched membrane lenses for lightweight space solar arrays"
  • Eric M Mockensturm, 2001, "The elastic stability of twisted plates", Journal of Applied Mechanics, 68, (4), pp. 561-567
  • Eric M Mockensturm and C. D. Mote, 2001, "Free response of twisted plates with fixed support separation", Journal of Vibration and Acoustics, 123, (2), pp. 175-180
  • Eric M Mockensturm, J. Frank, G. Koopmann and G. Lesieutre, 2001, "Modeling and simulation of a resonant bimorph actuator drive"
  • G. Lesieutre, G. Koopmann, Eric M Mockensturm, J. Frank and W. Chen, 2001, "Resonant bimorph driven, high-torque piezoelectric rotary sotor"
  • G. Lesieutre, G. Koopmann, Eric M Mockensturm, J. Loverich and D. Ericson, 2001, "Mechanically-ratcheting piezoelectric motors"
  • G. A. Lesieutre, G. H. Koopmann, Eric M Mockensturm, J. B. Frank and W. Chen, 2001, "Mechanical diode based, high-torque piezoelectric rotary motor"
  • Eric M Mockensturm, J. Frank, G. Koopmann and G. Lesieutre, 2001, "Optimization of a resonant bimorph actuator drive", Proceedings of the ASME 2001 Design Engineering Technical Conferences
  • Eric M Mockensturm, 2000, "Design and performance of a resonant roller wedge actuator"
  • Eric M Mockensturm and C. D. Mote, 1999, "Steady motions of translating, twisted webs", International Journal of Non-Linear Mechanics, 34, (2), pp. 247-257
  • J. Frank, Eric M Mockensturm, W. Chen, G. Koopmann and G. Lesieutre, 1999, "Roller-wedgeworm: A piezoelectrically-driven rotary motor"
  • Eric M Mockensturm, 1999, "Free response of twisted plates", Proceedings of the 1999 ASME Design Engineering Technical Conference
  • E. Serina, Eric M Mockensturm, C. D. Mote and D. Rempel, 1998, "A structural model of the forced compression of the fingertip pulp", Journal of Biomechanics, 31, (7), pp. 639-646
  • C. D. Mote and Eric M Mockensturm, 1998, Why wide webs wrinkle, Springer-Verlag, pp. 267-283
  • Eric M Mockensturm and C. D. Mote, 1997, "Translating webs with roller misalignment: Model and equilibrium", Proceedings of the 1997 ASME Design Engineering Technical Conference
  • C. D. Mote and Eric M Mockensturm, 1997, "The wide world of translating webs", Proceedings of the 1997 ASME Design Engineering Technical Conference
  • Eric M Mockensturm, N. Perkins and A. G. Ulsoy, 1996, "Stability and limit cycles of parametrically excited, axially moving strings", Journal of Vibration and Acoustics, 118, (3), pp. 346-351
  • N. Goulborne, M. Frecker and Eric M Mockensturm, , "Modeling dielectric elastomer membranes", Electroactive Polymers
 

About

The Department of Mechanical and Nuclear Engineering at Penn State is one of the nation’s largest and most successful engineering departments. We serve more than 1,000 undergraduate students and more than 330 graduate students

We offer B.S. degrees in mechanical engineering and nuclear engineering as well as resident (M.S., Ph.D.) and online (M.S., M.Eng.) graduate degrees in nuclear engineering and mechanical engineering. MNE's strength is in offering hands-on experience in highly relevant research areas, such as energy, homeland security, biomedical devices, and transportation systems.

Department of Mechanical and Nuclear Engineering

137 Reber Building

The Pennsylvania State University

University Park, PA 16802-4400

Phone: 814-865-2519