Directory

 

 
 
General InformationPublicationsResearch Projects

  • D. Beevers, L. Branchini, V. Orlandini, A. De Pascale and Horacio Perez-Blanco, 2015, "Pumped hydro storage plants with improved operational flexibility using constant speed Francis runners", Applied Energy, 137, pp. 629-637
  • Z. Francis and Horacio Perez-Blanco, 2013, "Simulation and revenue of fast response pumped storage to firm up renewables", HydroVision International Conference
  • Horacio Perez-Blanco, S. Richards and B. Leyde, 2013, "When intermittent power production serves transient loads", Applied Thermal Engineering, 50, pp. 1549-1556
  • S. Richards and Horacio Perez-Blanco, 2012, "Financial considerations of using pumped hydroelectric storage to increase the penetration of wind and solar generation", 2012 Turbo Expo., GT2012-68147
  • L. Branchini and Horacio Perez-Blanco, 2012, "Handling wind variability using gas turbines", 2012 Turbo Expo., GT2012-68045
  • L. Branchini and Horacio Perez-Blanco, 2012, "Computing gas turbine fuel consumption to firm up wind power", 2012 Turbo Expo., GT2012-68046
  • Horacio Perez-Blanco and M. McCaffrey, 2012, "Aerodynamic performance of preferred wind turbine airfoils", 2012 Turbo Expo., GT2012-68108
  • S. Richards and Horacio Perez-Blanco, 2012, "Mitigating the variability of wind and solar energy through pumped hydroelectric storage", 2012 Turbo Expo., GT2012-68121
  • S. Richards and Horacio Perez-Blanco, 2012, "The price suppression effects of wind power generation in PJM are likely to decrease the profits of pumped hydroelectric storage facilities that engage in energy arbitrage", 2012 HydroVision Conference
  • Horacio Perez-Blanco, S. Fishbone and L. Moroz, 2011, "Software in the classroom, demonstrating a stepwise approach to engineering design", Turbomachinery International, pp. 32-33
  • K. H. Kim, H. J. Ko, K. Kim and Horacio Perez-Blanco, 2011, "Analysis of water droplet evaporation in a gas turbine inlet fogging process", Applied Thermal Engineering, 31, pp. 834-840
  • Horacio Perez-Blanco, Scott Richards and Brian Leyde, 2011, "When intermittent power production serves transient loads "The Art of the Possible"", 2nd European Conference on Polygeneration
  • Horacio Perez-Blanco, Alex Rigg and Leonid Moroz, 2010, "Experience in teaching turbomachinery using advanced dedicated software", ASME 2010 International Mechanical Engineering Congress & Exposition IMECE 2010
  • Horacio Perez-Blanco and D. Kunkel, 2010, "Uncertainty of thrust prediction for a small demonstration turbojet", Proc. of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE 2010-40050
  • Kyung Chun Kim, Hyung-Jong Ko and Horacio Perez-Blanco, 2010, "Exergy analysis of gas-turbine systems with high fogging compression", International Journal of Exergy, 8, (1), pp. 16-32
  • K. H. Kim, H. Ko and Horacio Perez-Blanco, 2010, "Analytical modeling of wet compression of gas turbine systems", Applied Thermal Engineering, 31, pp. 834-840
  • Horacio Perez-Blanco, 2009, Dynamics of energy systems
  • Horacio Perez-Blanco, K. Kim and S. Ream, 2007, "An assessment of evaporatively cooled compression using a high-pressure refrigerant", Applied Energy, 84, pp. 1028-1043
  • K. H. Kim and Horacio Perez-Blanco, 2006, "Potential of regenerative gas-turbine systems with high fogging compression", Applied Energy, 84, pp. 16-28
  • K. H. Kim and Horacio Perez-Blanco, 2006, "An assessment of high-fogging potential for enhanced compressor performance", International Gas Turbine Institute Turbo Expo Proceedings, GT2006-90482
  • Horacio Perez-Blanco, R. Van Dyken, A. Byerley and T. McLaughlin, 2005, "Turbine cascade flow control using a "wake filling" plasma actuator", Proc. ASME Turbo-Expo 2005
  • F. Sancho Bastos and Horacio Perez-Blanco, 2005, "Cogeneration system simulation and control to meet simultaneous power, heating and cooling demands", Journal of Engineering for Gas Turbines and Power 50th Annniversary Issue
  • Horacio Perez-Blanco, Robert Van Dyken, Tom McLaughlin and Aaron Byerley, 2004, "Analysis of high load turbine blades at low Re numbers with CFX-BladeGen Plus", 2004 International ANSYS CONFERENCE PROC.
  • R. Van Dyken, Horacio Perez-Blanco, A. Byerley and T. McLaughlin, 2004, "Plasma actuator for wake flow control of high camber blades during part load operation", ASME IGTI Turbo Conference and Exposition
  • Horacio Perez-Blanco, 2004, "Experimental characterization of mass, work and heat flows in an air-cooled, single cylinder engine", Energy Conversion and Management, 45, (2004), pp. 157-169
  • M. Medrano, M. Bourouis, Horacio Perez-Blanco and A. Coronas, 2003, "A simple model for falling film absorption on vertical tubes in the presence of non absorbables", Int. J. of Refrigeration, 26, pp. 108-116
  • Horacio Perez-Blanco, 2003, "Activities around the SR-30 Minilab at PSU", ASEE Proceedings
  • F. Sancho Bastos and Horacio Perez-Blanco, 2003, "Cogeneration system simulation and control to meet simultaneous power, heating and cooling demands", International Gas Turbine Institute Turbo Expo Proceedings
  • S. Bastos and Horacio Perez-Blanco, , "Cogeneration system and control to meet simultaneous power, heating and cooling demands", ASME J. of Engineering for Gas Turbines and Power
  • L. Branchini and Horacio Perez-Blanco, , "Coupling wind and pumped storage hydro: Capacity constraints"
 

About

The Department of Mechanical and Nuclear Engineering at Penn State is one of the nation’s largest and most successful engineering departments. We serve more than 1,000 undergraduate students and more than 330 graduate students

We offer B.S. degrees in mechanical engineering and nuclear engineering as well as resident (M.S., Ph.D.) and online (M.S., M.Eng.) graduate degrees in nuclear engineering and mechanical engineering. MNE's strength is in offering hands-on experience in highly relevant research areas, such as energy, homeland security, biomedical devices, and transportation systems.

Department of Mechanical and Nuclear Engineering

137 Reber Building

The Pennsylvania State University

University Park, PA 16802-4400

Phone: 814-865-2519